Please find more information about this topic via the https://www.agriculture.gov.au/ website where this was originally published.
What's New
1 August 2022
Emerging risk countries - China and UK only
Chapters 39, 94 and 95 will be subject to random inspections for emerging risk countries
120 hours policy been amended for goods that have been rolled (with evidence)
Inspect (unpack) Inspections instead of Secure Seals intact inspections at Approved Arrangements
Seasonal measures for Brown Marmorated Stink Bug (BMSB)
BMSB seasonal measures will apply to targeted goods manufactured in or shipped from target risk countries, that have been shipped between 1 September and 30 April (inclusive), and to vessels that berth, load, or tranship from target risk countries within the same period.
Note: The shipped on board date, as indicated on the Ocean Bill of lading, is the date used to determine when goods have been shipped. “Gate in” dates and times will not be accepted to determine when goods are shipped.
We continuously review the measures throughout the season and may make necessary adjustments based on detections of BMSB and changes in the risk pathways. Learn more about:
BMSB Measures for Goods
If your goods are classed as target high risk, they will require mandatory treatment.
If your goods are classed as target risk, they will be subject to random inspection.
If your goods are not found in either category, they are not subject to BMSB measures, however, will be subject to the measures if packed with target high risk or risk goods.
Goods shipped in iso-tanks and as bulk-in-holds of cargo vessels are not subject to the measures.
Treatment of target high risk goods
Target high risk goods treated in target risk countries must be treated by a registered offshore BMSB treatment provider approved under the Offshore BMSB Treatment Providers Scheme.
Treatments conducted by an unapproved treatment provider in a target risk country will be deemed as invalid.
Containerised goods will be directed for onshore treatment.
Break bulk will be directed for export.
Break bulk goods
Break bulk includes those goods shipped on flat racks and in open top containers.
All target high risk goods shipped as break bulk must be treated offshore prior to arrival into Australia.
Untreated break bulk will be directed for export.
Onshore treatment is not permitted.
FCL containers that have been modified, such as those used to house in-built power generators, etc. are no longer sealed six hard sided containers are considered to be break bulk cargo
Automated Entry Processing for Commodity (AEPCOMM) arrangements for BMSB is permitted for break bulk goods. See relevant BICON commodities for assessment and outcomes.
Containerised goods (FCL, FCX)
Containerised cargo arriving in sealed six hard sided containers with target high risk goods can be treated offshore, or onshore at the container level.
Refrigerated containers (operating and non-operating) and hard top sealed containers (ISO22U6/ISO22UP, ISO42U6/ISO42UP and ISO45U6/ISO45UP) are deemed to be the same as six hard sided sealed containers.
Onshore treatment of goods is to occur at the container level. Deconsolidation or removal of goods from the container will not be permitted prior to treatment.
Ensure containers are packed in a manner that will enable effective onshore treatment at the container level to avoid possible export of the container.
AEPCOMM arrangements for BMSB is permitted for containerised goods shipped as FCL (Full Container Load) and FCX (Full Container Consolidated). See relevant BICON commodities for assessment and outcomes.
To demonstrate goods were sealed inside a container prior to 1 September or after treatment, a BMSB sealing declaration must be provided with the lodgement. This document is required where:
Goods were containerised prior to 1 September, but shipped after this date, or
The bill of lading does not state the shipped-on board date, or
Goods were sealed inside the container within 120 hours of treatment occurring offshore (for treatments conducted prior to 1 December)
Sealing declarations must be completed and signed by either the exporter, freight forwarder, or shipping company at the port of origin.
Note: Container tracking information may be used as supplementary means of confirming shipped on board date. It cannot be used as the primary form of evidence. Container tracking information is insufficient for demonstrating when goods were sealed in a container.
Containerised goods shipped as Less than Container Load (LCL) consignments and Freight of all Kinds (FAK) containers
LCL and FAK containers with target high risk goods will be managed at the container level for BMSB risk prior to deconsolidation. Once BMSB risk has been managed, the consignments within these containers will be processed at the Full Import Declaration (FID) level for all other biosecurity intervention (if applicable).
See the Management of LCL/FAK containers web page for more details.
Known risk pathways and supply chains
Goods from known risk pathways and supply chains that have had previous detections of BMSB may be subject to BMSB intervention including treatment and/or inspections.
These risk pathways and supply chains will be reviewed throughout the season and adjusted to manage the risk of BMSB as required.
Treatment of BMSB goods in Australia and New Zealand
The BMSB Seasonal measures are for goods being imported into Australian territory, and managing the risk associated for all goods that come into Australian territory.
In conjunction with New Zealand MPI, New Zealand and Australia will not be conducting BMSB treatments for each other.
Goods bound for Australia cannot be treated for BMSB in New Zealand and vice versa. For example, if the goods have been exported from New Zealand for not meeting BMSB import conditions, they will not be permitted to be treated in Australia, and vice versa.
Target Risk Countries
The following countries below have been categorised as target risk:
Albania
Andorra
Armenia
Austria
Azerbaijan
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Czechia
France
Japan (heightened vessel surveillance only).
Georgia
Germany
Greece
Hungary
Italy
Kazakhstan
Kosovo
Liechtenstein
Luxembourg
Montenegro
Moldova
Netherlands
Poland
Portugal
Republic of North Macedonia
Romania
Russia
Serbia
Slovakia
Slovenia
Spain
Switzerland
Turkey
Ukraine
United States of America
The following countries have been identified as emerging risk countries for the -BMSB risk season and may be selected for a random onshore inspection: United Kingdom and China
China – random inspections will apply to goods shipped between 1 September to 31 December (inclusive)
United Kingdom – random inspections will apply to goods shipped between 1 December to 30 April (inclusive)
In addition to the target high risk goods, chapters 39, 94 and 95 will be subject to random inspections for emerging risk countries only
Target Goods Subject to the Measures
Target high risk goods
Goods that fall within the following tariff classifications have been categorised as target high risk goods and will require mandatory treatment for BMSB risk.
44 - Wood and articles of wood; wood charcoal
45 - Cork and articles of cork
57 - Carpets and other textile floor coverings
68 - Articles of stone, plaster, cement, asbestos, mica or similar materials
69 - Ceramic products – including sub chapters I and II
70 – Glass and glass ware
72 - Iron and steel - including sub chapters I, II, III, IV
73 - Articles of iron or steel
74 - Copper and articles thereof
75 - Nickel and articles thereof
76 - Aluminium and articles thereof
78 - Lead and articles thereof
79 - Zinc and articles thereof
80 - Tin and articles thereof
81 - Other base metals; cermets; articles thereof
82 - Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
83 - Miscellaneous articles of base metals
84 - Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
85 - Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
86 - Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds
87 - Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof
88 - Aircraft, spacecraft, and parts thereof
89 - Ships, boats and floating structures
Target risk goods
Goods that fall within the following tariff classifications have been categorised as target risk goods and are only subject to increased onshore intervention through random inspection. Mandatory treatment is not required.
27 - Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
28 - Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes - including sub chapters I, II, III, IV and V
29 - Organic chemicals - including sub chapters I, II, III, IV, V, VI, VII, VIII, IX, X, XII and XIII
38 - Miscellaneous chemical products
39 - Plastics and articles thereof - – including sub chapters I and II
40 - Rubber and articles thereof
48 - Paper and paperboard; articles of paper pulp, of paper or of paperboard
49 - Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans
56 - Wadding, felt and nonwovens; special yarns; twine, cordage, ropes and cables and articles thereof
For all other goods that are not categorised as target high risk and target risk goods, BMSB seasonal measures do not apply. However, if they are part of a container or consignment that contains target high risk or target risk goods, they will be subject to the measures.
Measures for Vessels
All roll-on roll-off (ro-ro) vessels will be subject to heightened vessel surveillance.
All ro-ro vessels that berth at, load, or tranship in target risk countries between 1 September and 30 April (inclusive) will be required to:
Conduct self-inspections and respond to specific questions as part of the pre-arrival reporting requirements, and;
Undergo a mandatory seasonal pest inspection on arrival in Australia.
Vessel Seasonal Pest Scheme
The Vessel Seasonal Pest Scheme (VSPS) is an alternative vessel clearance pathway for ro-ro vessels.
Only ro-ro vessels that are eligible for the ‘Vessel Seasonal Pest Scheme’ and have detected no insects on board will be exempted from the mandatory seasonal pest inspection.
The department will continue to perform inspections on vessels for other biosecurity reasons unrelated to BMSB. The nature of these inspections will vary based on the biosecurity risk being managed.
For further information on the VSPS and BMSB seasonal measures for vessels, visit the Management of vessels web page.
Treatment Types and Rates for BMSB
Treatment Rates
There are three approved treatment options for BMSB treatment.
The approved treatments are:
Heat
For all goods types and sizes
56°C or higher at the coldest surface of the goods, for a minimum of 30 minutes or
Alternative option for individual goods weighing less than 3000 kg shipped as break bulk only, 60°C or higher at the coldest surface of the goods, for a minimum of 10 minutes
Note: Individual goods shipped as break bulk weighing less than 3000kg treated at 60°C for 10 minutes require evidence within shipping documentation that they are less than 3000kg for these treatments to be accepted.
Methyl Bromide
A dose of 24 g/m³ or above, at 10°C or above, for a minimum of 12 hours (but less than 24 hours), and a minimum end point reading of 12 g/m³ or
A dose of 24 g/m³ or above, at 10°C or above, for 24 hours or longer, and a minimum end point reading of 8 g/m³
Note:
All start time concentration readings must be above 24 g/m³.
Dose increases to compensate for temperatures less than 10°C is NOT permitted.
Topping up with additional fumigant at the end of treatment is NOT permitted.
If the concentration of fumigant falls below the minimum end point reading at any point during the treatment, the treatment has failed.
Sulfuryl Fluoride
A dose of 24 g/m³ or above, at 10°C or above, for a minimum of 12 hours (but less than 24 hours), and a minimum end point reading of 12 g/m³ or
A dose of 24 g/m³ or above, at 10°C or above, for 24 hours or longer, and a minimum end point reading of 8 g/m³
Note:
All start time concentration readings must be above 24 g/m³.
Dose increases to compensate for temperatures less than 10°C is NOT permitted.
Topping up with additional fumigant at the end of treatment is NOT permitted.
If the concentration of fumigant falls below the minimum end point reading at any point during the treatment, the treatment has failed.
Sulfuryl Fluoride – Using third-party system*
Achieve a CT of 200 g-h/m³ or more, at 10°c or above, for 12 hours or longer, with a minimum end point reading of 12 g/m³ or
Achieve a CT of 200 g-h/m³ or more, at 10°C or above, for 24 hours or longer, with a minimum end point reading of 8 g/m³
Note:
The approved stewardship program operators and their third party programs are:
Douglas Products or their agents - FumiGuide
Ensystex II, Inc. (USA) - Fumicalc
Barcan Barcan Pest Control & Fumigation Co. (Barcan ilaclama Fumigasyon Tic. Ltd.Sti.) (Turkey) - FumiTrack
Topping up with additional fumigant at the end of treatment is NOT permitted. If the concentration of fumigant falls below the minimum end point reading at any point during the treatment, the treatment has failed.
Treatment minimum standards
There are set minimum standards for the application of BMSB treatments. Treatments applied for biosecurity purposes are part of managing the risk of introducing exotic pests and diseases.
It is important that treatment providers understand these requirements as treatments to manage risk are only effective when conducted correctly. These standards outline best practice methodologies for applying biosecurity treatments.
Onshore treatment
Where onshore treatment of goods is permitted, you can find a list of approved arrangement providers on the department’s website.
Offshore treatment
The Offshore Brown Marmorated Stink Bug (BMSB) Treatment Providers Scheme (the scheme) sets out the department’s registration and compliance requirements for BMSB treatment providers, including compliance with applicable treatment methodologies.
Further information can be found on the Offshore BMSB treatment providers scheme webpage.
Treatment providers in target risk countries
All BMSB treatment providers in target risk countries must first register and be approved under the scheme by the department prior to treatment. Treatments conducted by an unapproved treatment provider in a target risk country will be deemed as invalid and the goods will be subject to onshore treatment (if permitted) or directed for export.
Treatment providers in non-target risk countries
Treatment providers in other countries who intend to conduct BMSB treatments for goods that are manufactured in or shipped from any of the target risk counties are encouraged to register under the offshore treatment provider’s scheme.
Treatment certificates from providers in non-target risk countries who do not register will be accepted, however these goods will be subject to increased intervention on arrival compared to those treated by approved treatment providers.
Fraudulent certificates
The department continues to improve its systems to monitor and detect the use of fraudulent certificates and will identify consignments that arrive in Australia with fraudulent documentation.
Any consignment identified with a fraudulent certificate will be directed for onshore treatment (if permitted) or exported.
See, Secure, Report
If you see something that could have entered Australia with imported goods report it to See. Secure. Report. on 1800 798 636 or complete the online form.
Comments